DC Geared Motors </ a "/>

What needs to be detected before using a DC geared motor?

The number of clicks: Updated: 2017-11-09 13:26:11 [ close ] share:
    What needs to be detected before using a DC geared motor ?

    1. Replace the plug at the highest position of the DC geared motor with an exhaust screw plug to ensure that the body gas is discharged during its operation.

    2. Check whether the fit size of the hole (or shaft) connected to the DC geared motor meets the requirements. The tolerance of the hole should be H7 (the tolerance of the shaft is H6).

    3. Note that the operating temperature of the DC geared motor is 0 ~ 40 ℃.

    4. The installation shaft should be cleaned before use. And check the installation shaft for any injuries and dirt, if there is any, it should be removed completely.


    直流减速电机

    contact us


    Zibo Zemei Motor Co., Ltd.

    Phone: 15063395708

    Fax: 0533-6880533

    Address: Bei'an, Zhoucun District, Zibo City


    Zemei Electric Wenzhou Office

    Phone: 0577-88359304

    Fax: 0577-88359304

    Contact: 13017804983

    Address: Qiaoertou, Lucheng District, Wenzhou

    contact us