First, the outer cycle: the outer cycle is the return of the motor to the screw nut through the spiral groove or cannula on the outer surface of the nut after the cycle process
Second, the inner cycle: the inner cycle uses an inverter to realize the motor cycle. There are two types of inverters.
In the process of linear motor, sometimes the contact with the lead screw is called the outer cycle; the contact with the lead screw is always called the inner cycle. The closed circuit of each motor cycle is called a column, and the number of leads contained in each ball cycle closed circuit is called the number of turns. Therefore, everyone should pay attention to these two circulation modes in the future work and use them according to their characteristics.
Zibo Zemei Motor Co., Ltd.
Address: Bei'an, Zhoucun District, Zibo City
Zemei Electric Wenzhou Office
Address: Qiaoertou, Lucheng District, Wenzhou