Direct current "/>

Why does the DC motor not charge?

The number of clicks: Updated: 2018-03-01 10:05:03 [ close ] share:

    Why does the DC motor not charge?

    ① Each wire connector in the DC motor is loose or detached, the wire sheath is damaged, and the ground is shorted;

    ② Fan pulley is too loose or oil slips;


    ③ The commutator of the generator (recommended: geared motor) is worn, burned or oily, the magnetic field coil is open or shorted, the armature coil is open or shorted, the rectifiers are shorted, and the insulated carbon brush holder is grounded;

    ④ Regulator (recommended: Yishun reducer) or throttle contacts are ablated or have dirt, the balance resistance is disconnected, the throttle bridge line is burned, the spring tension of the throttle is weak, the air gap is too small, the throttle pressure The limiter voltage adjustment is too low, the closing voltage of the circuit breaker is too high or the parallel coil is open.

    contact us

    Zibo Zemei Motor Co., Ltd.

    Phone: 15063395708

    Fax: 0533-6880533

    Address: Bei'an, Zhoucun District, Zibo City

    Zemei Electric Wenzhou Office

    Phone: 0577-88359304

    Fax: 0577-88359304

    Contact: 13017804983

    Address: Qiaoertou, Lucheng District, Wenzhou

    contact us