How to prevent the DC geared motor from blocking?

hit count: Updated: 2019-10-10 15:43:10 [ close ] share:

First, ensure the safe operation of key equipment

The catalyst is required to be injected in a certain proportion, and the injection stop time cannot exceed 15rain. Otherwise, it will reduce the melt viscosity and product quality. To ensure the smooth operation of the DC motor, some guarantee measures are taken.

2. Regularly change the lubricant and wear parts

The main moving parts of the DC geared motor are worm, worm wheel, slider, Dingxin piston, etc. The wear of these components will directly reduce the flow of the motor or not at all. The current solution is to replace the lubricant, wear parts and clean the hydraulic chamber regularly.

Third, strict operating procedures

The start and stop of the DC geared motor should be operated strictly in accordance with the requirements for use. At start-up, the motor is turned on with zero output, and the pressure regulator plate can be filled with nitrogen only when there is a certain pressure at the motor outlet. Avoid large deformation of the diaphragm due to nitrogen filling, to prevent the diaphragm from rupturing; when the motor output is increased, it should be performed slowly; when the motor is stopped, the motor output should also be slowly reduced.

Fourth, strengthen the maintenance of the motor

Periodic inspection during the operation of the DC geared motor, focusing on the inspection of lubricant oil level, machine motor sound, outlet pressure, nitrogen buffer tank pressure, etc. The diaphragm of the motor body and the diaphragm of the nitrogen buffer tank are regularly replaced to effectively prevent the catalyst from being stopped due to the simultaneous damage of the two motors.

contact us

Zibo Zemei Motor Co., Ltd.

Phone: 15063395708

Fax: 0533-6880533

Address: Bei'an, Zhoucun District, Zibo City

Zemei Electric Wenzhou Office

Phone: 0577-88359304

Fax: 0577-88359304

Contact: 13017804983

Address: Qiaoertou, Lucheng District, Wenzhou

contact us