How should DC speed motor speed controller be wired

hit count: Updated: 2019-03-19 09:56:03 [ close ] share:

    If the DC speed-regulated motor has motor vibration or no output torque during operation, it can be set to change the sequence of ABC three-phase connection. The specific wiring method is as follows:

    First, connect the power line and motor line of the DC speed governor.

    Connect the Hall signal line of the motor;

    1.Hall wires should be connected according to the color sequence of the motor wires;

    2. The Hall power supply must not be reversed, so as not to burn the motor Hall or driver.

    Third, the control signal line connected to the DC speed motor speed controller:

    1.External voltage control speed regulation of DC speed motor speed controller;

    2. Connect the switch to control the start and stop of the motor.

    contact us


    Zibo Zemei Motor Co., Ltd.

    Phone: 15063395708

    Fax: 0533-6880533

    Address: Bei'an, Zhoucun District, Zibo City


    Zemei Electric Wenzhou Office

    Phone: 0577-88359304

    Fax: 0577-88359304

    Contact: 13017804983

    Address: Qiaoertou, Lucheng District, Wenzhou

    contact us